How To Run A Cable Through The Ceiling. Its just like running regular romex wire. A drill with a bit and possibly an extender may be required to create a hole in the ceiling to run the cable.
Using the existing structure of ceiling joists makes. This is for running wires in the direction of the joists or perpendicular to them. Running electrical wires allows you to add additio.
Also it makes more sense to run the cables along a wall or in a hallway to causes the least amount of disruption Protecting the cable is as simple as installing guard strips, which can simply be a 1x2 furring strip on each side of the cable. 8 creative ways to run speaker wire through your ceiling 1.
This is for running wires in the direction of the joists or perpendicular to them. Start by drilling a hole through your ceiling. Do not run any data cable beneath the floor.
Slip the hanger and cable through the hole in the floor and ceiling below. Staple these cable loops to the 2x4s and run the cable through them. Use a drill with a 3/4 inch bit to drill through the subfloor, making sure the drill is perpendicular to the floor.
Its just like running regular romex wire. Then fish your wire from the basement to the top of the wall and pull it through into the room. Mounted either outside under the soffit or along the peak inside.
You would be opening a line in the ceiling, installing cable, and closing it up. Straighten out a wire coat hanger. If you have solid timber joists simply drill 1/2 holes through your ceiling joists.
Comments
Post a Comment